Peer-Reviewed Publications

Nur, T., Ryan, C., Bajwa, D., Cairns, D., Ridgard, C., Amendola, R. (2025) Characterization of Frictional Behavior of Fiber Reinforced Composites During Forming: A Review. Composites Part A: Applied Science and Manufacturing. v. 193 a. 108852

Nur, T., Ossa-Mechels, F., Ryan, C., Bajwa, D., Cairns, D., Ridgard, C., Amendola, R. (2025) Effect of Tool and Prepreg Surface Topography on Frictional Slippage vs Stretching Response of Stretch Broken Carbon Fiber (SBCF) Reinforced Composite During Forming. Composites Part A: Applied Science and Manufacturing. v. 197 a. 109047

Janicki, J., Egloff, M., Bajwa, D., Amendola, R., Ryan, C., Cairns, D. (2023) Design of Experiment to Determine the Effect of the Geometric Variables on Tensile Properties of Carbon Fiber Reinforced Polymer Composites. Journal of Composite Sciences. v. 7 i. 6 

Shchemelinin, Y., Nelson, J., Ryan, C. A, Bajwa, D. S., Cairns, D., Amendola, R. (2023) Hydraulic Bulge Testing to Compare Formability of Continuous and Stretch Broken Carbon Fiber Reinforced Polymer Composites. International Journal of Material Forming. 16, 21. 

Janicki, J., Amendola, R., Egloff, M., Ryan, C., Bajwa, D. S., Cairns, D., Dynkin, A. (2022) Formability Characterization of Fiber Reinforced Polymer Composites Using a Novel Test Method. ASTM Journal of Testing and Evaluation: v. 50 i. 2 p. 1140-1154

Janicki, J. C., Bajwa, D. S., Cairns, D., Amendola, R., Ryan, C., Dynkin, A. (2021) Gauge Length and Temperature Influence on the Tensile Properties of Stretch Broken Carbon Fiber Tows. Composites A: Applied Science and Engineering: v. 146 p. 7

Conference Presentations

Shchemelinin, Y., Ryan, C., Bajwa, D., Cairns, D., Ridgard, C., Amendola, R., Nelson, J. (2025) Formability Comparison of Continuous and Stretch Broken Prepreg Laminates. Vertical Flight Society 81st Annual Forum & Technology Display. no. 407

Williams, C., Ryan, C., Cairns, D., Ridgard, C., Nelson, J. (2025) Evaluation of SBCF and CCF Forming in Complex Shapes via a Unified Defect Scoring Index. Vertical Flight Society 81st Annual Forum & Technology Display. no. 408

Ridgard, C., Cairns, D., Ryan, C., Amendola, R., Bajwa, D. (2025) Scalability, Production, and Application of Stretch Broken Carbon Fiber for Primary Aircraft Structure. Vertical Flight Society 81st Annual Forum & Technology Display. no. 413

Cairns, D., Amendola, R., Bajwa, D., Cecily, R., Ridgard, C., Nelson, J. (2025) Stretch Broken Carbon Fiber for Primary Composite Structures. 45th Risoe International Symposium on Materials Science. IOP Conference Series: Materials Science and Engineering. v. 1338

Dockter, A., Decker, R., Forslof, D., Egloff, M., Cairns, D., Bajwa, D., Ridgard, C., Nelson, J., Amendola, R., Ryan, C. (2024) Method Development Towards Strength and Flaw Characterization of Single Carbon Fibers. ASME Aerospace Structures, Structural Dynamics, and Materials Conference. no. SSDM2024-121474

Gamage, D., Sobek II., D. (2024) A Set-Based Knowledge Generation Framework for Product Development. American Society for Engineering Management International Annual Conference. 

Gamage, D., Sobek II., D. (2024) A Novel Knowledge Mapping Toolkit for Product Development. American Society for Engineering Management International Annual Conference. 

Cairns, D., Amendola, R., Bajwa, D., Monfort, C., Nelson, J., Ryan, C. (2024) Creating a Community of Scholars for Large Applied Research Contracts in an Academic Infrastructure. ASEE.

Shchemelinin, Y., Nelson, J., Ryan, C., Bajwa, D., Cairns, D., Ridgard, C., Amendola, R. (2024) Hydraulic Bulge Forming Comparison of Continuous and Stretch Broken Carbon Fiber Prepreg Laminates. North America Society for the Advancement of Material and Process Engineering. no. 0093

Nur, T., Ossa-Mechels, F., Ryan, C., Bajwa, D., Amendola, R., Ridgard, C., Cairns, D. (2024) Comparison of Tool-Ply Slippage Characteristics of Continuous vs Stretch Broken Carbon Fiber Prepreg. North America Society for the Advancement of Material and Process Engineering. no. 0255

Cairns, D., Amendola, R., Bajwa, D., Cecily, R., Ridgard, C., Nelson, J. (2025) Stretch Broken Carbon Fiber for Primary Composite Structures. 45th Risoe International Symposium on Materials Science. IOP Conference Series: Materials Science and Engineering. v. 1338

Bajwa, D. (2023) Stretch Broken Carbon Fiber for Primary Structures. International Conference on Composite Materials.

Egloff, M., Nold, D., Ryan, C., Bajwa, D., Cairns, D., Amendola, R. (2023) The Effect of Resin Viscosity, Forming Rate, and Mean Filament Length on the Formability of Stretch Broken Carbon Fiber Prepreg. North America Society for the Advancement of Material and Process Engineering. no. 0212

Shchemelinin, Y., Nelson, J., Ryan, C., Bajwa, D., Cairns, D., Ridgard, C., Amendola, R. (2023) Multiaxial Out-of-Autoclave Forming Comparison of Continuous and Stretch Broken Carbon Fiber Prepreg Laminates. North America Society for the Advancement of Material and Process Engineering. no. 0214

Nold, D., Bajwa, D., Cairns, D., Amendola, R., Ryan, C., Ridgard, C., Egloff, M. (2023) Forming Properties of Stretch Broken Carbon Fiber Prepreg. North America Society for the Advancement of Material and Process Engineering. no. 0202

Rezaul, R., Cecily, R., Cairns, D. (2023) Effect of Stretch Ratio and Nip Force on the Generation of Stretch Broken Carbon Fiber. North America Society for the Advancement of Material and Process Engineering. no.0263

Nur, T., Ryan, C., Bajwa, D., Amendola, R., Ridgard, C., Cairns, D. (2023) Frictional Properties at Tool-Ply Interface of Continuous vs Stretch Broken Carbon Fiber (SBCF) Prepreg. The Composites and Advanced Materials Expo.  

Egloff, M.C., Powers, B., Nold, D., Bajwa, D.S., Ryan, C. A., Cairns, D., Amendola, R. (2022) A Predictive Forming Model for Stretch Broken Carbon Fiber Composites as a Function of State of Stress, Forming Rate, and Resin Viscosity. The Composites and Advanced Materials Expo. p. 1014-1024

Nur, T.J., White, Z.T., Bossert, B., Egloff, M.C., Ryan, C. A., Bajwa, D.S., Amendola, R., Cairns, D. (2022) Novel Experimental Unit to Evaluate Interply and Tool-Ply Friction in Carbon Fiber Reinforced Polymer Composite Prepregs. The Composites and Advanced Materials Expo. p. 1025-1040

Nold, D., Bajwa, D.S., Cairns, D., Amendola, R., Ryan, C. A., Ridgard, C. (2022) Tensile Properties of Stretch Broken Carbon Fiber Prepreg. The Composites and Advanced Materials Expo. p. 988-999

Rezaul, R.M., Ryan, C. A., Amendola, R., Bajwa, D. S., Cairns, D., (2022) Effect of Process Variables on the Uncured Handleability and Formability of Stretch Broken Carbon Fiber. The Composites and Advanced Materials Expo. p. 1041-1058

Ridgard, C., Cairns, D., Booth, E. (2022) Advances in the Development of Stretch Broken Carbon Fiber for Primary Aircraft Structure. The Composites and Advanced Materials Expo. p. 755-763

Shchemelinin, Y., Nelson, J., Ryan, C. A, Bajwa, D. S., Cairns, D., Amendola, R. (2022) Bulge and Dome Testing to Investigate the Formability of Continuous and Stretch Broken Carbon Fiber Prepreg Laminates. The Composites and Advanced Materials Expo. p. 1000-1013

Egloff, M., Amendola, R., Cairns, D. (2022) Formability of Stretch Broken Carbon Fiber. Montana State University Student Research Celebration Spring 2022. p. 20

Loomis, N., Bajwa, D.S. (2022) Comparison of Stretch Broken Carbon Fiber and Continuous Carbon Laminates Longitudinal Mechanical Properties. Montana State University Student Research Celebration Spring 2022. p. 40.

Nold, D., Bajwa, D.S. (2022) Tensile Properties of Stretch Broken Carbon Fiber Prepreg. Montana State University Student Research Celebration Spring 2022. p. 51.

Nur, T.J., White, Z., Cairns, D., Amendola, R., (2022).  A Novel Experimental Unit to Evaluate Inter-Ply and Tool-Ply Friction in Carbon Fiber Reinforced Polymer Composites Prepregs. Montana State University Student Research Celebration Spring 2022. p. 51.

Rezaul, R.M., Ryan, C. A., D. S., Cairns, D. (2022) Effect of Sizing Deposition and Fiber Length on the Uncured Handleability and Formability of Stretch Broken Carbon Fiber. Montana State University Student Research Celebration Spring 2022. p. 56.

Shchemelinin, Y., Nelson, J., Cairns, D., Bajwa, D.S, Ryan, C. A., Amendola, R. (2022). Hydraulic Bulge Test to Compare Formability of Continuous and Stretch Broken Carbon Fiber Prepreg Laminates. Montana State University Student Research Celebration Spring 2022. p. 62

Dynkin, A. (2021) Stretch Broken Carbon Fiber for Primary Aircraft Structures. GOCarbonFibre 2021

Egloff, M., Amendola, R., Bajwa, D. S., Cairns, D., Ryan, C. A., Nelson, J., Janicki, J., Dynkin, A. (2021) Macro and Microscale Formability Characterization of Stretch Broken Carbon Fibre Composite. SAMPE Europe Conference 2021 Baden/Zürich - Switzerland

Shchemelinin, Y., Amendola, R., Nelson, J. (2021) Hydraulic Bulge Testing to Compare Formability of Stretch Broken and Continuous Carbon Fiber Prepreg Laminates. 36th ASC Conference Proceedings/ American Society of Composites: p. 2851-2863

Shchemelinin, Y., Amendola, R., Eisgruber, R., Nelson, J., Cairns, D., Egloff, M., Janicki, J., Feigel, B., Bajwa, D. S., ... Lee, J. (2021) Preliminary Experimental/Analytical Correlation of the Forming of Stretch Broken Carbon Fiber Tows and Laminates. 36th ASC Conference/American Society of Composites: p. 2418-2435

Presentations

Interested in the SBCF Program?  Learn more about the program and the background of stretch broken carbon fiber by viewing this presentation.